Tag Archives: manufacturing error

Chevrolet And GMC Trucks – Center Seating/Console Rattle

Posted on by

A defect relating to seatbelt safety will have approximately 624,000 Chevrolet and GMC truck owners returning to their dealerships for an inspection and repairs. These vehicles are equipped with a center front row seating position.

According to the NHTSA defect report, the center front row seatbelt bracket may not be properly secured to the seat frame. If the bracket is loose, the seatbelt will not restrain the occupant during a crash or high-speed braking event.

WARNING: Signs that the problem exists include a rattling coming from the center seat / console area, the center front seat belt will feel loose or could detach from the seat completely.
Vehicles Affected Include
2019-2021 Chevrolet Silverado 1500
2020-2021 Chevrolet Silverado 2500
2020-2021 Chevrolet Silverado 3500
2021 Chevrolet Suburban
2021 Chevrolet Tahoe
2019-2021 GMC Sierra 1500
2020- 2021 GMC Sierra 2500
2020- 2021 GMC Sierra 3500
2021 GMC Yukon XL

Dealers will inspect the left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary. GM’s number for this recall is N202314670 and the NHTSA campaign number is 20V-792.

2020-2021 Ford Explorer and 2020-2021 Lincoln Aviator Engine Vibrations

Posted on by

Drivers experiencing engine vibrations in their 2020-2021 Ford Explorer and 2020-2021 Lincoln Aviator SUVs could have vehicles manufactured with engine mounting fasteners that were not correctly installed.

According to a defect report filed with the NHTSA, the automated tool used to secure the right-hand motor mount fasteners was not functioning properly and a manual handheld tool was used.  The manual backup process was not calibrated correctly and the motor mounts were improperly torqued.  Over time, one or more of the mounts could loosen and the engine will begin to vibrate.  If the problem is not fixed the engine mounts could eventually break.

Ford will notify owners to return to their dealers to have the right-hand motor mount fasteners replaced. The recall is expected to begin February 8, 2021. Ford’s number for this recall is 20S72 and the NHTSA campaign number is 20V-788.

GM, Nissan and VW Recalled For Defective Tires

Posted on by

The owners of certain 2020-2021 General Motors, Nissan and Volkswagen vehicles will be contacted by the automobile manufacturer regarding a problem that could exist with their tires. Continental Tires of America (CTA) have initiated a recall for tires that may have been installed as original equipment on some models.

General Motors Vehicles Affected
2020 Buick Enclave
2020 Cadillac XT5
2020-2021 Chevrolet Silverado 1500
2020 Chevrolet Traverse
2020 GMC Acadia
2020-2021 GMC Sierra 1500
Nissan Vehicles Affected
2020 Nissan Altima
Volkswagen Vehicles Affected
2021 Volkswagen Atlas
2020-2021 Volkswagen Atlas Cross Sport

According to CTA, over-cured tires could experience a break in the sidewall with sudden air loss or could develop a belt edge separation that could lead to partial or full tread/belt loss. These conditions could increase the risk of an accident.

Weak Driveshaft Welds – Chevy Silverado and GMC Sierra Trucks

Posted on by

General Motors will be contacting a small number of 2019-2020 Chevrolet Silverado 1500, 2020 Chevrolet Silverado 2500 and 2019-2020 GMC Sierra 1500 owners. because of a manufacturing problem affecting the power train in their vehicles.

According to the defect report, these trucks may contain a drive shaft with an improperly welded yoke to tube joint. This defective weld could case the drive shaft to separate under load, causing a loss of propulsion and an increased risk of an accident.

GM will be asking owners to return to their dealers to have the driveshaft replaced. GM’s number for this recall is N202314870 and the NHTSA campaign number is 20V-650.

Engine Stall From Insufficient Fuel Supply

Posted on by

General Motors will be asking the owners of certain 2020 GM automobiles to return to their dealerships to fix a problem affecting the fuel supply system in their vehicles. The vehicles affected include 2020 Buick Enclave, Cadillac XT5, Cadillac XT6, Chevrolet Traverse and GMC Acadia.

According to the defect report, the fuel pump assemblies in these vehicles may have been produced with burrs inside the mixing tube. Over time, these burrs could prevent the transfer of fuel from the secondary side of the fuel tank to the primary side. At low fuel levels, the engine may not receive enough fuel and the engine could stall unexpectedly. A stall without warning, especially at high speeds, could increase the risk of an accident.

Dealers will correct the problem by replacing the fuel pump module. GM’s number for this recall is N202314760 and the NHTSA campaign number is 20V-639.

GM Transmission Oil Leak

Posted on by

General Motors has decided that a safety defect exists in certain 2018-2020 Buick, Cadillac, Chevrolet and GMC vehicles. They will be notifying owners with instructions about how to get their vehicle repaired.

According to the defect report, some of these vehicles are equipped with a start / stop accumulator that may have missing bolts on the end cap. These loose bolts could result in a transmission oil leak that could progress into a complete loss of vehicle propulsion. A transmission leak in the presence of an ignition source could also result in a vehicle fire.

Vehicles Affected Include
2018-2019 Buick LaCrosse
2019-2020 Buick Encore
2019-2020 Buick Enclave
2019-2020 Cadillac XT4
2020 Cadillac XT6
2018-2019 Chevrolet Cruze
2018-2020 Chevrolet Equinox
2018-2020 Chevrolet Traverse
2018 Chevrolet Malibu
2019-2020 Chevrolet Blazer
2018-2020 GMC Terrain
2019-2020 GMC Acadia

Dealers will inspect the start-stop transmission accumulator and replace any missing bolts. GM’s number for this recall is N202313440 and the NHTSA campaign number is 20V-668.

Electronic Brake Boost Contamination In GM Vehicles

Posted on by

General Motors will be contacting the owners of certain 2020-2021 Buick Encore GX , 2020 Cadillac CT4, CT5 and XT4, 2020 Chevrolet Corvette and 2021 Chevrolet Trailblazer vehicles because of a problem affecting the electronic brake boost system.

According to the defect report, a connector in the system may have become contaminated during the manufacturing process. The contamination could interrupt the communication between the sensor and the system, under certain conditions. If communication is interrupted, electronic brake assist could be lost and the driver will require extra pedal force to stop the vehicle. Drivers may also notice an illuminated brake warning light in the instrument panel and the vehicle speed may be limited.

Owners receiving notices will be asked to return to their dealers to have the electronic brake boost module replaced. GM’s number for this recall is A202307260 and the NHTSA campaign number is 20V-588.

2019 Ford F-250 And F-350 – Steering Pulls To The Left Or Right

Posted on by

Ford Motor Company will be contacting the owners of certain 2019 F-250 and F-350, single rear wheel and dual rear wheel 4X4 trucks, because the front axle could have a problem which makes it difficult to control the vehicle.

According to the defect report, the affected vehicles may have been manufactured with front axles with a wheel end yoke that was not properly welded to the axle tube end. An improperly welded axle yoke attachment could affect vehicle control, including:

1. pulling to the right or left
2. mis-alignment of the steering wheel
3. change in steering sensitivity
4. vehicle response time during hard braking

During a hard braking event, drivers may experience a loud popping noise from the front axle before vehicle control is affected.

Owners receiving notices will be instructed to return to their Ford or Lincoln dealer to have the front axle wheel yoke weld location inspected. If the weld is in the wrong place, the axle assembly will be replaced. Ford’s number for this recall is 20S56 and the NHTSA campaign number is 20V-576 .