A manufacturing defect affecting airbags will have a small number of 2008-2017 Buick Enclave and 2013-2017 Chevrolet Traverse owners returning to their dealerships for repairs.

In July 2015 the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE15-027) into ARC Automotive Inc. (ARC) air bag inflators after receiving reports about two injury incidents involving a driver air bag inflator rupture. One incident involved a 2002 Chrysler Town & Country that had a dual-stage air bag inflator and the other involved a 2004 Kia Optima with a single-stage inflator. Both air bag inflators were manufactured by ARC.

During the evaluation the ODI gathered information from ARC about which air bag module manufacturers used the subject ARC inflators and requested information from the identified air bag module manufacturers about which vehicle manufacturers used modules with the subject ARC inflators. That process identified additional affected vehicle manufacturers, including General Motors.

According to the defect report, GM will be recalling certain 2008–2017 Buick Enclave and 2013-2017 Chevrolet Traverse vehicles for front driver airbag inflators which may have been installed either as original equipment or as part of a replacement driver airbag module during service. These airbags could contain a manufacturing defect that may result in an inflator rupture during deployment. If the inflator ruptures it could cause metal fragments to pass through the airbag and into the vehicle, potentially causing injury or death to vehicle occupants.

Dealers will inspect and replace the driver’s air bag module as necessary. GM’s number for this recall is N212349040 and the NHTSA campaign number is 21V-782.