On June 09, 2015 General Motors announced that they will be asking a small number of 2015 Cadillac ATS and CTS owners to return to their dealerships for repairs. According to reports filed with the NHTSA, the bracket between the brake pedal assembly and the rod that actuates the vehicle service brakes may have been fractured during manufacturing. If the bracket breaks the vehicle service brakes will not function. (The parking brakes will continue to function properly.) Continue reading

Owners of certain GMC, Chevrolet, and Cadillac trucks and SUV’s will be contacted by GM concerning a defect that could result in unexpected loss of engine, steering, and brake power. According to reports filed with the NHTSA, the ignition lock actuator outer diameter may exceed specifications. If the vehicles interior ambient temperature is sufficiently high, the key may bind making it difficult to turn and potentially becoming stuck in the “start” position. Cooling interior temperatures or a significant jarring event may result in the ignition lock cylinder moving out of the “Start” position and into the “Accessory” position, shutting off the engine. Continue reading

Certain 2015 Cadillac Escalade and Escalade ESV SUVs could fail to conform to the Federal Motor Vehicle Standard (FMVSS) for occupant crash protection. According to reports filed on the NHTSA website, the passenger side instrument panel top cover may have been manufactured with inadequate adhesion between the spacer fabric and the vinyl show surface. The problem could result in the airbag not deploying consistently, increasing the chance of injury to the front passenger. Continue reading

General Motors have identified a defect relating to motor vehicle safety exists in certain Buick, Cadillac, Chevrolet, and GMC cars, trucks, minivans, and SUVs, after certain vehicles began displaying a check engine malfunction indicator lamp (MIL) during post production testing. After observing an increase in warranty claims, GM has decided to issue a recall to have the problem repaired. Continue reading

Approximately two months after purchasing his new 2010 Cadillac SRX, the vehicle owner had already returned his truck to a GMC dealership for its first repair attempt. He subsequently provided GMC fifteen (15) more opportunities to repair the defect before he decided to contact the Law Offices of Delsack & Associates, P.C. to demand the repurchase of his vehicle under the California Lemon Law. Continue reading

A problem relating to motor vehicle safety will have almost three hundred thousand 2010-2015 Cadillac SRX and 20112012 SAAB 9-4X vehicles returned to a manufacturer approved repair facility to have the problem fixed.

On the affected vehicles, the jam nut in the rear suspension toe adjuster link may not be torqued to the proper specification. A loose toe adjuster link can cause the vehicle to wander, activate the vehicle’s electronic stability control system, and cause excessive wear to the links threads. Drivers may notice loud metallic noises from the rear suspension when traveling over bumps or potholes. If the treads in the link become worn, the link could separate and create sudden vehicle instability , increasing the risk of an accident. Continue reading

General Motors will be asking owners of certain Buick, Cadillac, and Chevrolet sedans to return their vehicles to a manufacturer approved repair facility to have their vehicles steering system inspected and repaired. According to reports filed at the NHTSA website, the fasteners holding the intermediate shaft and the steering gear, and/or at the lower control arm to the lower ball joint may have not been torqued to the correct specifications. The fasteners could loosen, parts could separate, and the driver could experience complete loss of steering. Continue reading

General Motors will be asking owners of certain Buick, Cadillac, Chevrolet, and GMC vehicles to return to their dealership to repair a problem that could leave the front seat occupant unprotected during an accident.

Some vehicles may have been manufactured with an incomplete weld on the seat hook bracket assembly for both front seats. If the assembly is exposed to a high load condition, the hook could separate from the seat track, increasing the risk of injury to occupants. Continue reading