General Motors believes that they have the final resolution for the Chevy Bolt saga by replacing the entire battery system on the Bolts. While the new batteries are starting to make their way into the Chevy dealerships, and into the vehicles, the waitlist is long, and the dealerships are getting limited inventory. One dealership we recently spoke with informed us that due to the physical complications in replacing the batteries, the process is slow, yielding perhaps only one or two vehicles per day. At this pace, the replacement of batteries into all Bolts will take several months.

In the meantime, GM has offered repurchases to many owners of the Bolts, but they’re not following up with consumers with time frames or logistics. While promises are being made, actions are not. And while a case is pending with GM, consumers are still struggling with how to protect themselves from dangerous fires, or something even as simple as where to safely park their Bolt.

We now have a client whose Bolt actually did catch fire in the middle of the night causing the destruction of the vehicle and other property. So, we know first-hand just how dangerous these vehicles are, and the destruction they’re capable of. Please heed all of the warnings GM has given and especially do not park a Chevy Bolt in an enclosed area.

We are still successfully pursuing Bolt cases against GM on a daily basis. For a free consultation, please email attorney Barry Edzant directly at BarryE@valencialaw.com and I will personally discuss your case with you. Be safe!

A manufacturing defect affecting airbags will have a small number of 2008-2017 Buick Enclave and 2013-2017 Chevrolet Traverse owners returning to their dealerships for repairs.

In July 2015 the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE15-027) into ARC Automotive Inc. (ARC) air bag inflators after receiving reports about two injury incidents involving a driver air bag inflator rupture. One incident involved a 2002 Chrysler Town & Country that had a dual-stage air bag inflator and the other involved a 2004 Kia Optima with a single-stage inflator. Both air bag inflators were manufactured by ARC.

During the evaluation the ODI gathered information from ARC about which air bag module manufacturers used the subject ARC inflators and requested information from the identified air bag module manufacturers about which vehicle manufacturers used modules with the subject ARC inflators. That process identified additional affected vehicle manufacturers, including General Motors.

According to the defect report, GM will be recalling certain 2008–2017 Buick Enclave and 2013-2017 Chevrolet Traverse vehicles for front driver airbag inflators which may have been installed either as original equipment or as part of a replacement driver airbag module during service. These airbags could contain a manufacturing defect that may result in an inflator rupture during deployment. If the inflator ruptures it could cause metal fragments to pass through the airbag and into the vehicle, potentially causing injury or death to vehicle occupants.

Dealers will inspect and replace the driver’s air bag module as necessary. GM’s number for this recall is N212349040 and the NHTSA campaign number is 21V-782.

General Motors has decided that a defect relating to vehicle safety exists in certain 2021-2022 Chevrolet Silverado 2500/3500 and 2021-2022 GMC Sierra 2500/3500 trucks.

GM first became aware of the problem in September 2021 when two 2021 GMC Sierra 2500 vehicles experienced under hood fires at the assembly plant. Both vehicles were parked outside awaiting shipment and had been exposed to heavy rainfall the day before. Using X-ray and CT scans on the vehicles showed a gap between the bolt head and brake pressure modulator valve (BPMV), indicating that the assembly had not been properly sealed to prevent water intrusion. Both vehicles had been subject to temporary production process changes that involved offline replacement of the electronic brake control module (EBCM), which is a sub-assembly of the BPMV. Analysis of the vehicles also found that the fire started in this area.

According to the defect report, bolts attaching the BPMV may have not been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an under hood fire.

Owners of these trucks are advised to park outside and away from other structures until the recall repair is completed. Dealers will correct the problem by replacing the BPMV assembly.. GM’s number for this recall is N212349181 and the NHTSA campaign number is 21V-758.

In July 2021 General Motors (GM) opened an investigation into fuel pump failures after a review of warranty data from certain 2021 GM full size SUVs. The data showed that there was a higher than expected rate of fuel pump control modules replaced for vehicles built within certain months. As part of the investigation, GM looked at the returned parts replaced in warranty claims and found the condition was caused by a manufacturing issue at the Tier 3 supplier.

According to the defect report, certain 2021 Cadillac, Chevrolet and GMC full size SUVs may have been manufactured with fuel pump power control modules which contain a defect that can cause the fuel pump to fail or operate intermittently. When this happens, fuel flow to the engine will be interrupted and the vehicle could unexpectedly stall.

The Vehicles Affected Include:
2021 Cadillac Escalade
2021 Cadillac Escalade ESV
2021 Chevrolet Suburban
2021 Chevrolet Tahoe
2021 GMC Yukon
2021 GMC Yukon XL

Owners receiving notices will be asked to return to their dealers to have the fuel pump power control module replaced. GM’s number for this recall is N212332040 and the NHTSA campaign number is 21V-739.

In December 2020, Fox Factory received its first reports that certain GM vehicles fitted with Tuscany lift kits could experienced partial or complete wheel separation while in operation. Fox began reviewing field data and started a safety investigation to assess the failure mode, the failure rate and potential causes of the problem. By September 2021 Fox identified 28 warranty claims and field or service reports potentially relating to this issue and decided to initiate a voluntary safety recall.

According to the defect report, “Accelerated wear on the vehicle OEM installed ball joint in the front upper control arm can result in premature ball joint failure and a front wheel separation while the vehicle is in motion .”

Failure of a ball joint in a front upper control arm may be preceded by noise and / or a feeling of clicking in the steering, abnormal front tire wear and abnormal steering.

The Vehicles Affected Include:
2019-2021 Chevrolet Silverado 1500
2019-2021 GMC Sierra 1500

New Tuscany front upper control arms will be installed in place of the GM front upper control arms. The fix will include upgraded front upper control arms with stronger and less corrosion sceptible ball joints. NHTSA Campaign Number: 21V718.

This is an expansion of NHTSA Recall 20V-701 and 21V-560.

General Motors has decided that a defect which relates to motor vehicle safety exists in 2020-2022 Chevrolet Bolt EVs and 2022 Chevrolet Bolt EUVs. The high voltage batteries in these vehicles may pose a fire risk when charged to full, or very close to full, capacity.

Defective battery modules will be replaced, but until then, GM advises owners to Activate either the Hill Top Reserve (2017 and 2018 models) or Target Charge Level (2019 models) feature in their vehicle to limit the charge level to 90%, charge their vehicle more frequently, avoid depleting the battery to 70 miles range remaining, park outside after charging, and do not charge the vehicle indoors overnight.

Interim notification letters notifying owners of the safety risk were mailed on August 13, 2021. Owner notification letters were mailed on August 13, 2021. GM’s number for this recall is N212343880 and the latest NHTSA campaign number is 21V-650.

In March 2021, a safety report was submitted to GM’s Speak Up for Safety program regarding a warranty claim affecting the seat belt on a low mileage 2021 Cadillac XT4. The customer’s complaints included a rattling noise coming from the passenger side rear seat belt. The rattle could be heard while driving or when attempting to use the seat belt. The dealer determined that the noise was caused by a missing lower fastener in the retractor assembly. A search for similar allegations discovered three additional potentially related claims also involving XT4 vehicles. In each case, the complaint was a rattling noise that was determined to be caused by a loose or missing fastener in a rear seat belt retractor.

An investigation also revealed that 2016-2021 Chevrolet Malibu vehicles were assembled at the same place using the same right-hand rear side assembly process and added these vehicles to the investigation. Data for the entire population of approximately 1.4 million 2019-2021 XT4 and 2016-2021 Malibu vehicles produced at Fairfax found no additional related claims.

Investigator analysis of the repair procedure determined that the procedure could have been the cause of the loose or missing fasteners under a specific set of circumstances that was unlikely to occur, but possible. The investigator retrieved plant manufacturing records to determine whether other vehicles were subject to similar repairs. Those records identified 437 such vehicles out of the total population. Testing was also conducted that determined it was possible for the condition to be present with the absence of warning noises, even though each of the three relevant field reports did describe audible warning signs.

Although no additional related claims were found, GM have decided to conduct a recall.

According to the defect report, GM will be recalling certain 2016-2021 Chevrolet Malibu and 2019-2021 Cadillac XT4 vehicles manufactured at their Fairfax plant. Dealers will inspect the rear seat belt retractors and tighten them as necessary. GM’s number for this recall is N212333380 and the NHTSA campaign number is 21V-649.

General Motors have decided that a defect affecting vehicle safety exists in certain Hankook tires installed as original equipment on some 2021-2022 Chevrolet Equinox and GMC Terrain vehicles.

In July 2021, GM’s Speak Up For Safety program received information that two tires, received through GM warranty return, had suffered delamination. In June, the owner of a 2021 GMC Terrain brought their vehicle to a GM dealer with complaints of vibration and thumping noises while driving. The dealership noted that the owner had a previous issue with a tire on a road trip that resulted in tire replacement. Both tires were shipped to the supplier. GM became aware of a third tire potentially related to this condition in July. All three tires were from DOT number 0521. GM initiated a yard hold and sort for vehicles equipped with tires from that DOT number. Through testing Hankook determined that the delamination was caused by an insufficient amount of curative agent in a particular batch of rubber. In July Hankook informed GM that they intended to issue a tire recall. GM is not aware of any accidents or injuries associated with this condition and have decided to conduct a safety recall.

Delamination of tread may occur at high speeds. The tire will likely not deflate or burst, but the tread separation might compromise vehicle handling and/or cause a crash. Warning signs that your tires are delaminated include noise or feel vibration while driving and/or a bulge in the tread may also be noticeable.

Dealers will inspect the tire DOT numbers and replace any affected tires. GM’s number for this recall is N212343560 and the NHTSA campaign number is 21V-612.