General Motors (GM) have decided that a defect affecting safety exists in certain 2021-2022 Chevrolet Equinox and 2022 GMC Terrain vehicles. They opened an investigation into the problem in August 2022 after noticing a high rate of warranty returns for the fuel tank pump on some 2021-2022 model year Equinox and Terrain vehicles.

GM’s investigation analyzed field data, defective returned components, and conducted an inspection of the tier two supplier’s facility and manufacturing processes. During this investigation, GM found that the supplier’sf manufacturing team made an unauthorized change in the fuel tank pump rolling force in May 2021 and that this error was discovered and corrected by the supplier’s engineering team on June 2021. GM conducted an analysis of field data relating to claims GM received between May 22, 2021, and December 15, 2022, and identified 710 stall events potentially related to the recall condition.

According to the defect report, during a specific production period between May 2, 2021, and June 1, 2021, a tier-two supplier implemented an unauthorized change to the fuel pump in the manufacturing process which decreased the pump section clearances. This resulted in the potential for insufficient fuel flow to the engine. If the fuel pump module does not consistently provide sufficient fuel to the engine, the vehicle may stall.

Drivers may notice an illuminated check engine light or experience engine hesitation. If the vehicles stalls, it could be difficult to restart.

Owners receiving notices will be asked to return to their dealers to have the fuel pump module replaced in their vehicles. GM’s number for this recall is N222372310 and the NHTSA campaign number is 23V-013.

General Motors (GM) is a well-known automotive manufacturer throughout the world, but even they are not immune to problematic vehicles experiencing safety concerns. Recently, two separate recalls were announced by the National Highway Traffic Safety Administration (NHTSA) that impact certain GM models.

The first recall affects 2017-2019 Chevrolet Silverado 2500, 3500, and GMC Sierra 2500, 3500 vehicles equipped with a dual fuel tank option. The recall is due to a potential rear fuel tank failure that may cause the engine to stall. This is a serious safety risk for drivers and passengers, as a sudden stall in traffic can result in an accident.

The second recall affects the 2023 Chevrolet Blazer and Traverse, 2023 Cadillac XT5 and 2023 GMC Acadia vehicles. The issue with these vehicles is a missing retaining ring in the half-shaft assembly. This can cause the half-shaft to separate from the vehicle, leading to a complete loss of power and control.

If you own one of the vehicles listed in the recalls, it is important to have the problem addressed as soon as possible. If you feel like you have a lemon vehicle that is continually having safety issues, you can take legal action against the manufacturer. Lemon laws vary by state, but in general, a vehicle is considered a lemon if it has a defect that impairs the use, value, or safety of the vehicle and is not repaired after a reasonable number of attempts.

The recent recalls from General Motors highlight the importance of staying informed about potential safety issues with your vehicle. If you own one of the affected vehicles, make sure to have it repaired as soon as possible. If you believe you have a lemon vehicle, seek legal advice to protect your rights and ensure your safety on the road

If you believe you have a lemon vehicle, you can contact a lemon law attorney for advice on your rights and options. You may be entitled to a replacement vehicle, a refund, or compensation for your expenses. If you have any questions about your rights under the California Lemon Law, please call our office at 1-888-395-3666 and get some great Lemon Law advice!

General Motors (GM) has decided that a defect affecting seat belt safety exists in certain 2017-2023 Chevrolet Bolt EVs. GM will be contacting owners of affected vehicles with instructions to return to their dealership to have the problem corrected by installing fire barriers.

GM first became aware of the problem in September 2022 after receiving a report of a 2018 Chevy Bolt EV that experienced a fire. The fire seemed to originate in the right side lower pillar in the area of the pretensioner. GM opened an investigation into the incident and identified a total of three field incidents where exhaust from a deployed pretensioner ignited carpet fibers near the B-pillar. By December, GM’s Safety Field Action Decision Authority (SFADA) decided to conduct a safety recall.

The problem arises during certain crash conditions that require the front seat belt pretensioners to deploy. According to the defect report, the temperature of the exhaust from a deployed pretensioner may be sufficient enough to ignite carpet and other materials in close proximity to the pretensioner.

Owners receiving notices will be asked to return to their dealership to have a metal foil barrier added between the carpet and pretensioner. Some vehicles will also require the installation of a pretensioner cover that will prevent the ignition of carpet material from pretensioner exhaust.

This recall will be launched in two phases, under bulletins N222383790 and N222383791. Notification to owners of vehicles that require only the installation of the foil barrier is estimated to begin on January 30, 2023. Owners of vehicles that also require installation of the pretensioner cover will begin receiving interim notification on January 30, 2023, with a second notification when parts become available. The NHTSA campaign number for this recall is 22V-930.

Chevy Bolt Seat Belt Pretensioner Fire

General Motors (GM) will be contacting the owners of certain 2022-2023 Chevrolet Malibu’s because of a problem affecting a structural portion of the vehicle frame.

GM first became aware of the problem in August 2022 when a production operator installing parts on a vehicle discovered a section of the motor rail was missing. Further investigation found that the front rail outer panel was cut too short and, as a result, was not completely welded to the front right-hand side of the front impact bar.

The problem was reported to GM’s Speak Up For Safety (SUFS) program which worked with the plant and supplier to identify and contain affected vehicles. Of the 1,875 vehicles that GM contained and inspected, they found none that had an incomplete weld. GM opened an investigation into the subject condition to analyze the potential effects of this condition during a crash. There are no known field incidents related to this condition., but GM has decided to conduct a safety recall.

According to the defect report, the sheet metal blank for the front frame rail outer panel for the 2022-2023 Chevy Malibu was improperly loaded into the die. As a result, the front frame rail was cut 10 millimeters short of its intended design. The shortened frame rail prevented proper welding of the front impact bar to the front frame rail. This defect may be present on the right hand and/or left-hand side of the vehicle.

Owners will be asked to return to their GM dealer to have the right-hand and left-hand sides of the vehicle’s motor rail inspected for incomplete welds. If the condition is found, the vehicle will be repurchased by GM. The NHTSA campaign number for this recall is 22V-923.

Is GM Repurchasing Your Lemon Vehicle?

Under the Lemon Law, if you qualify, you should be able to recover your down payment, (including registration fees, licensing fees, taxes, transportation costs, etc.), plus your total monthly lease or loan payments. The manufacturer will also pay off the balance of your loan or lease. The manufacturer will also pay all or most of your attorney’s fees.

If you have any questions about your rights and the California Lemon Law, please call our office at 1-888-395-3666 and get some great Lemon Law advice!

General Motors (GM) will be contacting the owners of certain HD and XD trucks because of a problem affecting the suspension in their vehicles. If the problem is not fixed, it could lead to difficult steering and an increased risk of an accident.

In November 2022, GM received information from one of their suppliers that there was an investigation into a manufacturing quality problem in certain flange lock nuts used in 2021-2022 model year Chevrolet Silverado medium-duty vehicles. After consulting with their supplier, GM’s Safety Field Action Decision Authority (SFADA) decided to conduct a recall.

The vehicles affected include:

2021-2022 Chevrolet 4500HD
2021-2022 Chevrolet 4500XD
2021-2022 Chevrolet 5500HD
2021-2022 Chevrolet 5500XD
2022 Chevrolet 6500HD

According to the defect report, certain hex flange lock nuts used in several locations on the suspension in some HD and XD trucks were not properly formed and heat treated by the supplier. Over time, the nuts could loosen and cause a loss of tension in the suspension joints. Over time, drivers will notice a degradation in vehicle handling.

Parts are not currently available, but when parts are available owners will be asked to return to their dealerships to have the hex flange lock nuts replaced. GM’s number for this recall is N222391080 and the NHTSA campaign number is 22V-874.

General Motors (GM) will be contacting the owners of certain 2022-2023 Chevrolet Equinox and 2022 GMC Terrain SUVs because the driver’s seat in these vehicles may have a defect that could affect the drivers safety. The vehicles involved are equipped with powerd driver seats without the memory function.

GM became aware of the problem in July 2022 during noise testing at their assembly plant, after a driver seat frame height adjust pivot bolt was discovered on the floor of one of the test vehicles. The problem was brought to the attention of GM’s Speak Up For Safety program and inspections of vehicles at GM assembly plants and parts returned to the supplier was initiated. GM identified several stripped or loose pivot bolts in power seat frames produced by the supplier between June 30, 2022 and July 15, 2022, and decided to conduct a safety recall.

According to the defect report, the seat frame supplier assembly process did not detect improperly torqued bolts. As a result, the driver seats in these vehicles may have a stripped or loose bolt at the seat frame height adjust pivot. If the seat frame height adjust pivot bolt comes out of the pivot joint, the seat structure may not properly restrain the occupant during an accident and could increase the risk of injury. Vehicle occupants may hear squeaks or rattles coming from the driver’s seat, and/or the seat may feel loose.

Owners will be asked to return to their dealers to have the driver’s seat inspected and replace the seat cushion frame, if necessary. GMC’s number for this recall is N222377890 and the NHTSA campaign number is 22V-724.

If your vehicle is experiencing repeated problems, it could be a Lemon. Know your Lemon Law Rights. If you have any questions about your rights and the California Lemon Law, please call our office at 1-888-395-3666 and get some great Lemon Law advice!

General Motors (GM) will be contacting the owners of certain 2021-2022 Cadillac, Chevrolet, and GMC SUVs equipped with third-row seating. These vehicles may have been manufactured with an improperly formed mounting bracket rivet that may not restrain an occupant during an accident.

The vehicles affected by this problem include:

2021-2022 Cadillac Escalade
2021-2022 Cadillac Escalade ESV
2021-2022 Chevrolet Suburban
2021-2022 Chevrolet Tahoe
2021-2022 GMC Yukon
2021-2022 GMC Yukon XL

In May 2022, a GM dealership received a customer complaint about the separation of the third row seat belt assemblies in their 2021 Chevrolet Suburban. The problem was submitted to GM’s Speak Up For Safety program and a formal investigation was opened. During this investigation, another seven additional field reports were found that could be related to this condition. Further investigation into the problem determined that operators at the seat belt buckle assembly supplier’s manufacturing plant may have not properly followed manufacturing processes and as a result, may have missed the rivet forming operation. In July, GM’s investigator met with the seat belt buckle assembly supplier to determine the scope of potentially affected parts. On August 4, 2022, GM’s Safety Field Action Decision Authority (SFADA) decided to conduct a safety recall.

According to the defect report, the rivet that retains the buckle to the mounting bracket in the left and/or right side third-row seat belt buckle assembly may not have been properly formed during the manufacturing process. If the assembly is not properly riveted, it will not restrain occupants during an accident and could result in increased injuries.

Owners receiving recall notices will be asked to return to their GM dealer to have the rivet head formation on both the left and right side third-row seat belt buckle assemblies inspected and replace seat belt buckle assemblies, as necessary. GM’s number for this recall is N222372380 and the NHTSA campaign number is 22V-617.

Certain 2022 Chevrolet Silverado and 2022 GMC Sierra vehicles equipped with a high-mounted brake light accessory sports bar, may fail to meet the Federal Motor Vehicle Safety Standard (FMVSS) for lamps, reflective devices and associated equipment.

General Motors (GM) first became aware of the problem in April 2022, when a GM engineer observed an accessory sports bar installation problem on a 2022 Chevrolet Silverado. The problem was reported to GM’s Speak Up For Safety (SUFS) program and a formal investigation was opened. The investigation reviewed customer field data and found 15 claims related to this condition

According to the defect report, some 2022 Chevrolet Silverado and 2022 GMC Sierra trucks may have a dealer-installed accessory sports bar that contains a high-mounted stop lamp that will not operate as intended when installed according to the provided instructions. The installation of the bar also blocks the vehicle’s existing high-mounted stop lamp. If the high-mounted stop lamp is not working or is not visible to other drivers, it will increase the risk of an accident.

The instructions for wiring the accessory sports bar is not compatible with the electrical design of certain 2022 Silverado and Sierra trucks. 2019-2021 model year vehicles and 2022 model year vehicles built with the previous electrical architecture (RPOs J21 and AMK) are not affected by this problem. This accessory is not intended for use on 2500/3500 series vehicles.

GM is not aware of any accidents or injuries associated with this condition. Investigators analyzed sales records to identify potentially affected trucks and over the counter sales and have decided to conduct a noncompliance recall. Approximately 242 vehicles are affected.

Owners receiving notices will be asked to return to their Chevy or GMC dealer to have the installation of the sports bar inspected and repaired as necessary. GM’s recall number for this recall is N222368110 and the NHTSA campaign number is 22V-463.