A recent safety concern has emerged for a small number of 2021 and 2024 Nissan Titan vehicles due to a potential issue with their Air Bag Control Unit (ACU). This problem, if left unaddressed, could increase the risk of injury to occupants in the event of a crash.

In May 2024, Nissan was alerted by their airbag supplier about a production error that involved a missing spacer between the ACU fastener and the base plate. This spacer plays a critical role in ensuring that the ACU is properly secured. Without it, there is a risk that the fastener could interfere with the vehicle’s floor pan, leading to the fastener becoming loose. If this occurs, the airbag may deploy late or not at all, which could significantly increase the risk of injury during a crash.

Upon learning about the problem, Nissan and the supplier conducted a thorough audit. They discovered that 531 affected parts had been shipped to Nissan’s Canton, MS Plant. Fortunately, 528 of these parts were identified and quarantined before they could be installed in vehicles. However, three parts had already been installed in 2024 Nissan Titan vehicles that had been shipped.

In June 2024, the supplier identified additional affected parts included in a service part kit, of which 41 were shipped to Nissan. Nissan was able to quarantine and scrap 37 of these parts, but four had already been installed in 2021 Nissan Titan vehicles during repairs.

On July 19, 2024, after further assessment, Nissan confirmed that the absence of the spacer could indeed cause interference with the floor pan, potentially leading to loose fasteners and compromised airbag deployment.

As a result of these findings, Nissan decided on July 29, 2024, to initiate a Voluntary Safety Recall for the seven affected vehicles—three from the 2024 model year and four from the 2021 model year. While there have been no reports of accidents or injuries related to this issue, Nissan is taking precautionary measures to ensure the safety of its customers.

Nissan will address the issue by replacing the ACU in the affected vehicles. Owners of these vehicles will receive notification letters starting September 19, 2024. The recall number assigned by Nissan is PD120, and the corresponding National Highway Traffic Safety Administration (NHTSA) campaign number is 24V-580.

Although the number of vehicles affected is small, this recall is a critical step to ensure the safety of Nissan Titan drivers and passengers. If you own a 2021 or 2024 Nissan Titan, keep an eye out for the notification letter and get the the necessary repairs.

A select number of Jeep Wrangler and Jeep Gladiator vehicles that were previously repaired under NHTSA recall number 23V-116 are now slated for a crucial Powertrain Control Module (PCM) software update.

In February 2023, FCA US LLC’s Vehicle Regulations Committee launched a safety recall (19A) targeting specific 2018-2023 Jeep Wrangler and 2020-2023 Jeep Gladiator models with manual transmissions. This recall was triggered by reports of potential overheating of the clutch pressure plate due to friction. Such overheating could cause the pressure plate to fracture rapidly, leading to cracks or holes in the transmission case. This damage could result in the expulsion of heated debris from the transmission case, posing safety risks to vehicle occupants and other road users.

By June 2024, FCA’s Technical Safety and Regulatory Compliance (TSRC) organization received reports of vehicles stalling after undergoing the 19A recall remedy. An investigation focused on specific 2021 Jeep Wrangler and 2021 Jeep Gladiator vehicles with manual transmissions that had received the initial remedy under FCA US Recall ID 19A / NHTSA Recall 23V-116. The investigation found that these vehicles might encounter an issue with the Revolutions per Minute (RPM) reduction feature in the PCM software.

The issue was traced to a suspect software release that began on June 19, 2024. This software release introduced a malfunction affecting the RPM reduction feature. The release period ended on June 26, 2024, when the software was withdrawn from availability. Affected vehicles were identified using PCM scan data, ensuring precise identification of those needing further attention. It was confirmed that similar vehicles not included in the recall either lacked manual transmissions or were not updated with the problematic software version.

The remedy involves updating the PCM software in the affected vehicles to ensure the RPM reduction feature operates correctly. This update aims to eliminate the risk of stalling and enhance overall vehicle performance.

Owners of the affected Jeep Wrangler and Jeep Gladiator models will receive notification letters by August 15, 2024. These letters will provide detailed instructions on how to proceed with the necessary software update.

For reference, FCA US LLC has assigned the number 92B to this recall, and the NHTSA campaign number is 24V-572. It is crucial for vehicle owners who had previously completed repairs under recall 23V-116 to ensure this new remedy is completed to maintain vehicle safety and reliability.

In April 2024, Hyundai became aware of a significant safety issue involving the main floor wiring harness in certain 2024 Hyundai Santa Fe and Santa Fe Hybrid Electric Vehicle (HEV) models. This issue was first identified following reports of an inadvertent rear seat side airbag deployment in a Santa Fe vehicle in South Korea. As a result, Hyundai initiated a preliminary investigation, which was subsequently extended to include the North American market.

The defect centers on the main floor wire harness, which in the affected vehicles is susceptible to damage due to contact with the passenger-side, second-row bench seat’s folding hinge assembly. This contact can result in the wire harness becoming chafed, leading to several potential hazards:

  • Illumination of the Air Bag Warning Light: A damaged wire harness can trigger the air bag warning light on the vehicle’s dashboard, indicating a malfunction.
  • Inadvertent Air Bag Deployment: The damage can cause the airbags to deploy unintentionally, posing a significant risk to vehicle occupants.
  • Failure to Deploy Air Bags During a Crash: Conversely, the damage could also prevent the airbags from deploying in the event of a crash, reducing the effectiveness of this critical safety feature.

Hyundai’s investigation revealed eight unique incidents related to this defect in the U.S. market. These findings prompted the company to take immediate action to address the issue and ensure the safety of its customers.

Hyundai will notify affected vehicle owners via first-class mail, instructing them to bring their vehicles to an authorized Hyundai dealer for inspection and repair. The repair process will involve:

  1. Inspection of the Wire Harness: Dealers will check the condition of the main floor wire harness for any signs of damage.
  2. Securing the Wire Harness: If no damage is found, the harness will be properly secured to prevent future contact with the seat’s folding hinge assembly.
  3. Replacement of Damaged Wire Harness: If damage is detected, the wire harness will be replaced with a new one to ensure the vehicle’s safety systems function correctly.


As a precaution, Hyundai advises vehicle owners to be vigilant for any of the warning symptoms mentioned in the defect report, such as the air bag warning light illuminating. If any of these symptoms are present, owners are urged to immediately go for diagnosis and the necessary repairs.

Owner notification letters are scheduled to be mailed out on September 23, 2024. Hyundai has assigned the internal recall number 265 to this campaign, while the National Highway Traffic Safety Administration (NHTSA) has designated it as campaign number 24V-561.

Chrysler is reaching out to owners of specific Alfa Romeo, Fiat, and Jeep models due to a potential issue with the seat belt buckle switch sensor. This problem might prevent the front seat airbag from deploying properly in the event of a crash, posing a significant safety risk.

The recall affects the following vehicle models:

2017-2024 Alfa Romeo Giulia
2018-2025 Alfa Romeo Stelvio
2019-2023 Fiat 500X
2019-2023 Jeep Renegade
2024 Fiat 500E

In November 2023, the Stellantis Europe Customer Experience (CX) department, specifically through the European Reactivity process Acceleration for Customer Enthusiasm (RACE) organization, initiated an investigation. This came after they received multiple reports of airbag warning lights illuminating in certain vehicles. These warning lights are critical indicators of potential issues within the vehicle’s safety systems, specifically those related to the airbags.

The Stellantis Europe CX team conducted a review of the supplier data, connector design, and any changes in the vehicle’s manufacturing history. Their investigation identified that the affected vehicles might have been built with a suspect connector on the buckle switch sensor. By February 2024, the Stellantis Europe CX organization had officially opened a safety investigation into the buckle switch sensor’s integrity. The investigation continued, and in June 2024, Stellantis Europe, through their Vehicle Regulations Committee, decided to conduct a voluntary safety recall for the affected vehicles.

The Scope of the Problem

As of June 26, 2024, Stellantis Europe had identified 578 field reports in North America potentially related to this issue. These reports were received between November 9, 2023, and June 26, 2024, indicating a widespread concern among vehicle owners.

According to the defect report, the problem arises from a disrupted connector on the buckle switch sensor. This disruption can affect the conduction on the seat wiring and buckle connectors, leading to a potential malfunction of the front seat airbag. In the event of a crash, an airbag that fails to deploy as intended can significantly increase the risk of injury to the driver.

Warning Signs for Drivers

Drivers of the affected vehicles might notice specific warning signs indicating a problem with the airbag system. These signs include:

  • The airbag warning light staying on even when there is no issue with the airbag itself.
  • The seatbelt reminder buzzer sounding even when the seatbelt is fastened properly.

These indicators should not be ignored, as they signal a malfunction that could compromise the vehicle’s safety systems.

Owners of the affected Alfa Romeo, Fiat, and Jeep models will receive official notification letters starting August 22, 2024. These letters will provide detailed instructions on the recall process. Owners will be asked to return their vehicles to authorized dealers to have the buckle switch sensor connection inspected and repaired at no cost.

The recall has been assigned the number 82B by FCA US, LLC, and the National Highway Traffic Safety Administration (NHTSA) has designated the campaign number 24V-510 for this recall.

The secondary steering torque sensor may not be properly calibrated on certain 2018-2023 Ford Mustang, 2018-2020 Ford F-150, 2018-2021 Ford Expedition, and 2018-2021 Lincoln Navigator vehicles. These vehicles are equipped with electronic power assist steering (EPAS) gears, which were installed as replacement service parts and are now found to have potential calibration issues.

This issue came to light when Ford’s Critical Concern Review Group (CCRG) was alerted by the supplier about an assembly problem affecting certain steering gears. To thoroughly understand the extent of this problem, Ford’s CCRG conducted a detailed review that included examining supplier maintenance records, warranty reports, and vehicle testing data. The findings prompted Ford’s Field Review Committee to decide on issuing a recall to address the defect.

The defect report indicates that the electronic Power Assist Steering (EPAS) gears, which were sold as service parts, may have an incorrectly calibrated secondary digital torque sensor in the steering gear. Specifically, the polarity of this sensor may be inverted. If the primary steering torque sensor fails or develops a fault, and the secondary digital torque sensor’s polarity is inverted, the steering wheel could start oscillating without warning. This means the steering wheel might alternate between clockwise and counterclockwise movements when the driver attempts to steer, leading to unintended steering assist from the electronic power steering gear.

This oscillation poses a significant safety risk as it can make steering unpredictable and difficult to control, potentially leading to accidents. Recognizing the severity of this issue, Ford has taken measures to address it.

Ford dealers will update the Power Steering Control Module (PSCM) software in the affected vehicles to correct the calibration issue. This update is intended to ensure the proper functioning of the secondary torque sensor, thereby preventing the unintended steering oscillation.

Owner notification letters were mailed on August 5, 2024, to inform vehicle owners about the recall and the necessary steps to have their vehicles repaired. Ford has assigned this recall the number 24S45, and it is also registered under the National Highway Traffic Safety Administration (NHTSA) campaign number 24E-055.

Certain 2024 Jaguar and Land Rover vehicles have been identified as being at risk for an oil leak within the engine compartment. An oil leak in the presence of an ignition source, such as hot engine components or exhaust parts, significantly increases the risk of a fire. This safety concern has prompted an investigation and subsequent recall to address the issue.

Jaguar Land Rover North America, LLC (Land Rover) first became aware of the problem in April 2024, following a field report that described an oil filter housing with a hairline crack. In response, Land Rover, along with the housing supplier, initiated a thorough investigation. Throughout April and May, the supplier reviewed the reported failures, inspected returned parts, and conducted extensive durability testing on the incorrect material parts. By June 7, 2024, the results of these tests were reported, and the Product Safety and Compliance Committee (PSCC) opened a formal investigation into the matter.

In June 2024, the Recall Determination Committee (RDC) concluded that the issue posed an unreasonable risk to safety, leading to the decision to launch a safety recall to remedy the affected vehicles. This decision was driven by the small number of fires reported as a result of the oil leak concern.

The following 2024 models have been identified as affected by this recall:

2024 Jaguar F-Pace
2024 Land Rover Defender
2024 Land Rover Discovery
2024 Land Rover Range Rover
2024 Land Rover Range Rover Sport
2024 Land Rover Range Rover Velar

Owners of these vehicles will receive official notices asking them to return to their dealers. The necessary repairs will involve replacing the filter housing, oil filter, and O-rings to ensure the safety and reliability of the vehicles. Jaguar’s reference number for this recall is H506, and the NHTSA campaign number is 24V-451. Land Rover’s number for this recall is N908 and the NHTSA campaign number is 24V-450.

blank-dashboard-displayChrysler (FCA US, LLC) is taking steps to address an issue affecting the rear view cameras in over a million of its vehicles. On October 23, 2023, the FCA Technical Safety and Regulatory Compliance (TSRC) organization was alerted to a potential problem where rear view cameras were not displaying images in certain Dodge, Chrysler, Jeep, and Ram models. This issue potentially violates the Federal Motor Vehicle Safety Standards (FMVSS) for rear visibility.

An investigation revealed that a software glitch in the radio system of these vehicles could cause the rear view camera to fail to display the required image when the vehicle is put into reverse. This noncompliance with FMVSS No. 111, which mandates that rear visibility systems must default to showing the rear view image and adhere to specific field of view and image size requirements at the start of each backing event, regardless of any prior modifications made by the driver.

The issue, affecting 1,033,433 units, was identified during a thorough investigation. By June 2024, FCA US’s Vehicle Regulations Committee determined that a voluntary safety recall was necessary to rectify the problem.

The vehicles affected include:

2021-2023 Chrysler Pacifica
2021-2022 Dodge Durango
2022-2023 Jeep Compass
2021-2023 Jeep Grand Cherokee
2022-2023 Jeep Grand Wagoneer
2022-2023 Jeep Wagoneer
2022 RAM 1500
2022 RAM 2500
2022 RAM 3500
2022-2023 RAM Promaster

NOTE: Owners of these vehicles will notice that the rear view image does not appear when the vehicle is placed into reverse.

To resolve this issue, dealers will update the radio software in the affected vehicles. Owner notification letters are scheduled to be mailed out by August 2, 2024. FCA has designated this recall with the number 66B, and it corresponds to the National Highway Traffic Safety Administration (NHTSA) campaign number 24V-436.

The Volkswagen ID.4 SUV represents the German automaker’s entrance into the growing electric vehicle (EV) market. Launched with the promise of combining the brand’s legendary driving dynamics with cutting-edge EV technology, the ID.4 aims to provide a sustainable yet practical driving experience. However, as with many new models, especially those pioneering new technologies, the ID.4 has faced its share of teething troubles. This article will delve into the common problems reported by ID.4 owners and explain how these issues could potentially classify your vehicle as a lemon under the California Lemon Law. We’ll also highlight the importance of seeking assistance from a lemon law attorney if you find yourself grappling with persistent vehicle issues.

Common Volkswagen ID.4 Problems

1. Charging Issues

Many ID.4 owners have reported difficulties with charging their vehicles. Problems range from slow charging speeds to the car not charging at all. Some users have encountered issues with the compatibility of their ID.4 with various public charging stations, leading to inconvenience and frustration.

2. Software Glitches

The ID.4’s infotainment system and other software-driven features have been a source of concern for some drivers. Complaints include unresponsive touchscreens, malfunctioning navigation systems, and intermittent connectivity issues with smartphones. These software bugs can detract from the overall user experience and disrupt daily usage.

3. Battery Performance

Some ID.4 owners have reported inconsistent battery performance, including unexpected drops in range and inaccurate range estimates. Such issues can severely impact the reliability of the vehicle, especially for long-distance travel.

4. Build Quality

Although Volkswagen is renowned for its build quality, some ID.4 owners have experienced issues with fit and finish. Reports include problems with door alignment, rattling noises from the cabin, and malfunctioning interior components. These issues, while sometimes minor, can affect overall satisfaction with the vehicle.

5. Electrical System Faults

Electrical system faults have also been reported, with owners experiencing warning lights and system errors. These faults can be unsettling and sometimes necessitate multiple visits to the dealership for resolution.

When Is Your Vehicle a Lemon?

A vehicle is generally considered a “lemon” if it has significant defects that affect its use, value, or safety, and these defects persist despite multiple repair attempts. Under California law, a vehicle is presumed to be a lemon if:

  • The manufacturer has made at least two attempts to repair a warranty problem that could result in death or serious injury if the vehicle is driven.
  • The manufacturer has made at least four attempts to fix the same warranty problem.
  • The vehicle has been out of service for more than 30 days (not necessarily consecutive) for warranty issues.

Understanding the California Lemon Law

The California Lemon Law, officially known as the Song-Beverly Consumer Warranty Act, provides robust protections for consumers who purchase or lease new vehicles. The law mandates that if a manufacturer cannot repair a vehicle to conform to its warranty after a reasonable number of attempts, the manufacturer must either replace the vehicle or refund the purchase price, minus a usage fee.

Benefits of the California Lemon Law

  1. Consumer Protection: The law protects consumers from being stuck with a defective vehicle.
  2. Replacement or Refund: Consumers are entitled to a replacement vehicle or a refund, ensuring they receive the value they paid for.
  3. Legal Support: Consumers can recover legal fees if they prevail in a lemon law claim, making it financially feasible to pursue legitimate claims.

The Importance of a Lemon Law Attorney

Navigating the intricacies of the California Lemon Law can be challenging, and manufacturers often have significant legal resources at their disposal. Here’s why hiring a lemon law attorney is a smart move:

  1. Expertise: Lemon law attorneys have specialized knowledge of consumer protection laws and can effectively navigate the legal process.
  2. Maximized Compensation: An attorney can help ensure you receive the maximum compensation you are entitled to, including potential incidental and consequential damages.
  3. No Upfront Costs: Many lemon law attorneys work on a contingency basis, meaning they only get paid if you win your case.

Conclusion

The Volkswagen ID.4 SUV, while a promising entry into the electric vehicle market, has faced several common problems reported by owners. If you find yourself repeatedly dealing with these issues, your vehicle might qualify as a lemon under the California Lemon Law. Seeking the assistance of a lemon law attorney can provide the expertise and support needed to navigate this legal landscape and ensure you receive fair treatment. Remember, consumer protection laws are there to safeguard your rights and ensure you get the quality you paid for in your vehicle purchase.